Primary brand
Schneider Electric
Main function
AC servo motor
Product series / family name
Lexium SH3 series
Sub-range name
Servo motors
Design
abs. multi-turn 128ppr SinCos encod.
smooth shaft
holding brake
triple (3) motor stacks
torque and speed of rotation optimized
low-inertia
Supply voltage (AC)
115Vac-480Vac (120Vac / 200Vac / 208Vac / 220Vac / 230Vac / 240Vac / 380Vac / 400Vac / 415Vac / 440Vac)
Rated active power (kW)
0.9kW / 900W
Moment of inertia
0.152kg.cm2
Connection type
rotatable right-angled connector
Communication protocol
HIPERFACE
Mounting mode
55x55mm flange
Degree of protection
IP54
IP65
Ambient air temperature for operation
-20…+40 °C
Compliant with standard(s)
UL 1004-1
UL 1004-6
CSA 22.2 No. 100
CE
Benefits
Lexium SH3 servo motors are an excellent solution to the need for dynamic performance; covering a continuous stall torque range from 0.2 to 33.4 Nm (0.2 to 24.6 lbf ft) for speeds up to 9000 rpm
Thanks to their new winding technology based on salient poles; Lexium SH3 servo motors are far more compact and offer a higher power density than conventional servo motors
The ambient operating temperature is -20…+40°C / -4…+ 104°F without derating; in accordance with IEC 60721-3-3; category 3K3; and up to 55°C / 131°F with derating of 1% of the nominal output power per additional °C above 40°C / 104°F
The windings are insulation class F (maximum temperature for windings 155°C / 311°F; in accordance with IEC 60034-1
All mounting positions are permitted (horizontal mounting (IMB5) or vertical mounting (IMV1 with shaft end at the top and IMV3 with shaft end at the bottom) in accordance with IEC 60034-7
Manufacturer product status
Commercialized
